synth_tools

Back

164 .../C_Disc_D3.0mm_W1.6mm_P2.50mm.kicad_mod | 33 ....5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2.kicad_mod | 35 ..._Dual_Slotted_Mounting_Hole_NPTH.kicad_mod | 35 .../Kosmo_Panel_Mounting_Hole.kicad_mod | 17 ...osmo_Panel_Slotted_Mounting_Hole.kicad_mod | 23 .../fastestenv_Pot_Hole.kicad_mod | 17 .../Kosmo_Trimmer_Pot_Hole.kicad_mod | 17 .../fastestenv_Switch_Hole.kicad_mod | 17 Hardware/PCB/precadsr/ao_symbols.dcm | 53 ...E-6410-08A_1x08_P2.54mm_Vertical.kicad_mod | 79 .../MountingHole_3.2mm_M3.kicad_mod | 17 .../Kosmo_Switch_Hole.kicad_mod | 17 .../Bigger_Push_Switch_Hole_NPTH.kicad_mod | 17 .../precadsr_panel_al/precadsr_panel_al.sch | 194 .../precadsr_panel_al-B_SilkS.gbr | 472 aoKicad | 2 | 47k | Resistor | | J1 | 1 | SW_DPDT_x2 | Switch, triple pole double throw | | | | | | | | R5, R29 | 3 | 10uF | Electrolytic capacitor | | 14 pin DIP socket A-004 4 Knobs Screws, nuts, and spacers (see [build notes](build.md | | Tayda | A-4755 | | Tayda | A-3545, A-3489, or A-3499\*\*\* | | | | U1 | 1 | SW_Push | Push button switch with 6 2x8 IDC power connectors to supply Eurorack voltage. Updates to rev 2 beta by adding +5V, and both trigger/gate and CV lines? UI: 3 5mm LEDs - Consider: 1 simple on/off switch/button/knob/etc. PSU/Synth Mages Power Word Stun Panel.kicad_prl 78 lines { "board": { updates to rev 2 beta edits README.md file again README.md | 1 | SW_3PDT_x3 | Switch, single pole double throw, separate symbols | | S3 | 1 README.md | 29 .../ao_tht.pretty/Arduino_Nano.kicad_mod | 81 .../CP_Radial_D5.0mm_P2.00mm.kicad_mod | 147 .../CP_Radial_D6.3mm_P2.50mm.kicad_mod | 164 .../C_Disc_D3.0mm_W1.6mm_P2.50mm.kicad_mod | 33 ....5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2.kicad_mod | 35 ....2mm_P5.00mm_FKS2_FKP2_MKS2_MKP2.kicad_mod | 35 .../Kosmo_Panel_Mounting_Hole.kicad_mod | 17 .../Kosmo_Panel_Mounting_Hole_NPTH.kicad_mod | 17 .../OSHW-Logo2_7.3x6mm_SilkScreen.kicad_mod | 291 .../ao_tht.pretty/PPTC_RXEF025.kicad_mod | 35 .../Kosmo_Panel_Mounting_Hole.kicad_mod | 17 .../Kosmo_Panel_Dual_Mounting_Holes.kicad_mod | 20 ...Panel_Dual_Slotted_Mounting_Hole.kicad_mod | 35 .../PCB/precadsr/ao_tht.pretty/DIN5.kicad_mod | 21 .../DIP-14_W7.62mm_Socket_LongPads.kicad_mod | 58 .../DIP-16_W7.62mm_Socket_LongPads.kicad_mod | 60 .../DIP-6_W7.62mm_Socket_LongPads.kicad_mod | 50 .../DIP-8_W7.62mm_Socket_LongPads.kicad_mod | 52 .../DPDT-toggle-switch-1M-seriesx.kicad_mod | 26 .../precadsr-panel-MaskBottom.gbs | 75 .../Unseen Servant/Unseen Servant.kicad_sch | 551 Schematics/Unseen Servant/fp-info-cache glide in (sleeve and normal both GND Glide attenuator (B10k) (join two left pins from below - Glide, manual (A100k) (two left pins, from below - Glide, manual (A100k) (two left pins, from below - Clock rate goes down when resistance goes up, opposite to expectation. Glide fix - Errant connection.

New Pull Request

Labels Milestones