Labels Milestones
BackKnobs affixed with a 7-segment display with LED backlight 160x104 RS-232 I2C or SPI LCD graphical display 480x272 16-bit colour with led backlight TFT graphical display 480x272 16-bit colour with LED backlight 160x104 RS-232 I2C or SPI http://www.lcd-module.com/fileadmin/eng/pdf/grafik/edip128-6e.pdf LCD-graphical display with LED backlight http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft43-ae.pdf TFT-graphic display 320x240 16 bit colour TFT-graphical display 800x480 16-bit colours with capacitive touch panel http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft70-ae.pdf TFT-graphical display 800x480 16-bit colours http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft70-ae.pdf TFT-graphical display 800x480 16-bit colours http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft70-ae.pdf TFT-graphical display 800x480 16-bit colours and touch display STN/FSTN LCD 128x64 dot https://www.digchip.com/datasheets/parts/datasheet/1121/AG-12864E-pdf.php AG12864E Graphics Display 128x64 Ampire Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI https://learn.adafruit.com/monochrome-oled-breakouts/downloads Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI https://learn.adafruit.com/monochrome-oled-breakouts/downloads Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI https://learn.adafruit.com/monochrome-oled-breakouts/downloads Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI https://learn.adafruit.com/monochrome-oled-breakouts/downloads Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI https://learn.adafruit.com/monochrome-oled-breakouts/downloads Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI CR2013-MI2120 ILI9341 LCD Breakout LCD-graphical display with a capacitor / resistor pair, see Fireball's hard sync to schematic, laid out PCB with exploratory 8hp layout 2x Sockets, all three pins need wires: glide in (sleeve and normal both GND - Gate stops working after a few more 'simple' Unseen Servant functions More traces and vias, and net links Add four more switches/buttons, move LED drivers onto PCB added the once through idea with commentary by added the once through idea with commentary by Correcting changed filename in .prl Correcting changed filename in .prl * LEDs in sliders, lit for each stage? * TBD, needs testing; but if LEDs are possible, this should be possible, too Manual trigger * See manual step button in Unseen Servant - LFO or other form that results from an addition to, deletion from.
- Amphenol 031-71059, https://www.amphenolrf.com/library/download/link/link_id/594427/parent/031-5539/ Würth WR-SMA PCB.
- Ideas Initial stab at.
- 0.115312 0.00018283 0.993329 vertex 6.27889.