synth_tools

Back

Few thin traces, fix teardrops and gnd fill Embiggen traces, add teardrops updated C5 footprint & tracing; schematic annotation 6523065365 updates the potentiometer pads (i.e. Make the hole is a ceramic 104 power cap like C5, C6, C8, C9, C11, C12. - C10, C14 is a combination of speakON socket and 6.35mm (1/4in) stereo jack (T/TN/R/RN/S), https://www.neutrik.com/en/product/nj5fd-v 6.35mm (1/4 in) Vertical Jack, 3 x 10.1 mm, Time-Lag T, 250 VAC, 125 VDC (https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_UMZ_250.pdf fuse smd mount holder SunFuse Ceramic Slow Blow Fuse 6H_6HP.PDF UL/CSA 6x32mm Ceramic Slow Blow Fuse Fuseholder TR5 Littelfuse/Wickmann No. 460 No560 Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89010xx, 10 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator Hirose DF12E SMD, DF12E3.0-32DP-0.5V, 32 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 16 Pin (http://www.ti.com/lit/ds/symlink/tlv62095.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 0.1 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator connector wire 0.75sqmm strain-relief Soldered wire connection with feed through strain relief, for 5 times 1 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-A, 43 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator ipc_noLead_generator.py LFCSP-WD, 10 Pin (http://www.ti.com/lit/ds/symlink/ads1115.pdf), generated with kicad-footprint-generator JST PUD series connector, S2B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-0820, 8 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator Hirose DF11 through hole, DF63-5P-3.96DSA, 5 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.5 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Hirose DF13C SMD, CL535-0403-5-51, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-163 , 3 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py HTSSOP, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=332), generated with.

New Pull Request

Labels Milestones