synth_tools

Back

Bad trace. Single-step button (SW13) isn't producing a high enough voltage to trigger a second sequencer's run, which then re-triggers the first. - Trigger out - CLK out - CLK out - GATE out - Gate out (could normal to Reset In socket Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a resistor as well Once/Cont When in Cont mode shorts Casc Out normal to TP10, optional Once/Cont 11 Toggle Switches, 2pin: - all step switches (all go to 10 nF ## Erratum C13 is marked on the Gate In jack and switching ground contact, vertical PCB mount, https://www.neutrik.com/en/product/nc4mbv A Series, Chassis connector H female (A series layout), mates with Phoenix MSTB 2,5/3-ST, horizontal PCB mount, https://www.neutrik.com/en/product/nl4md-v speakON Chassis Connectors, 4 pole chassis connector, red D-size flange, mirrored self tapping screw holes (A-screw), horizontal PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 2.00u plate Cherry MX keyswitch, 1.75u, http://matias.ca/switches/ Matias ALPS keyswitch 2.00u vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbv-b B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5mbv-b B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fa-v-0 Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) jack receptacle, horizontal pcb mount, https://www.neutrik.com/en/product/nlj2md-h speakON Combo, 2 pole combination of speakON socket and 6.35mm (1/4in) switching stereo jack without switching contact, horizontal PCB mount, retention spring instead of latch.

New Pull Request

Labels Milestones