synth_tools

Back

PSU PCB (will affect choice of sitching hardware). Consider aesthetics and prcticality of stand-offs from front panel. - Current design uses six IDC 2×8 connectors with 4 unused pins if supplying power, but not that small - C3 and C4 could use fewer caps that way 7022ad9ddb couple more GND-stitch vias From 77735c00cc3285131373f5cfc61b82eab5963d12 Mon Sep 17 00:00:00 2001 Subject: [PATCH] updated README.md updated C14 footprint, traces, groundplane Find and replace last few thin traces, fix teardrops and gnd fill Embiggen traces, add teardrops f63cfba9541079f9f5e1341fca38abad6837ea65 Add 55k-ish resistor to coarse knob to fix tuning range 's notes on updating the fireball for rev 2 beta edits README.md file again edits README.md file edits README.md file again README.md | 5 | 2N3904 | Small Signal NPN Transistor, TO-92 KK254 Molex connector 2.54 mm spacing KK254 Molex connector 2 pin Molex connector 2.54 mm spacing D Switch, three position, dual pole triple throw, 3 position switch, SP3T K switch dual double-pole single-throw OFF-ON D Double Pole Single Throw (SPST) switch, separate symbol D 7x DIP Switch, Single Pole Single Throw (DPST) Switch K switch dp3t ON-ON-ON D Switch, triple pole double throw, separate symbols"/> Switch, triple pole.

New Pull Request

Labels Milestones