Ref="R27" pin="2"/> main MK_VCO/Fireball/Fireball_panel.kicad_pro 505 lines | 13 ...6.3mm_D2.5mm_P10.16mm_Horizontal.kicad_mod | 39 .../ao_tht.pretty/Rotary_Switch.kicad_mod | 38 .../ao_tht.pretty/Wall_wart_A-4118.kicad_mod | 28 .../ao_tht.pretty/analogoutput.kicad_mod | 213 .../ao_tht.pretty/analogoutput_12mm.kicad_mod | 210 Hardware/PCB/precadsr/fp-lib-table | 4 .../PCB/precadsr_Gerbers/precadsr-F_Paste.gbr | 4 README.md | 4 Schematics/LUTHERS_VCO.diy Executable file View File Images/PXL_20210831_004139245.jpg Normal file Unescape Hardware/Panel/precadsr-panel/precadsr-panel.pretty/precadsr-panel-art.kicad_mod Normal file View File Find and replace last few thin traces, fix teardrops and gnd fill Embiggen traces, add teardrops updated C5 footprint & tracing; schematic annotation Add 55k-ish resistor to coarse knob to fix tuning range 's notes on updating the fireball for rev 2 beta by adding +5V, and both trigger/gate and CV lines? **UI:** - 3 x switching (normalling) stereo jack and switching ground contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mav B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3maah-1 AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mamh-ph speakON Combo, 2 pole chassis connector, black D-size flange, mirrored self tapping screw holes (A-screw), horizontal PCB mount, https://www.neutrik.com/en/product/ncj9fi-v-0.
alt
click/enter