Labels Milestones
BackStep // 1 hp from side to a trace already use spokes where ground planes connect to holes - these gaps reduce heat conduction during soldering ground plane Change transistor footprint to inline_wide, fix DRC ground plane on only one side to center of package, Thorlabs photodiodes, https://www.thorlabs.de/drawings/374b6862eb3b5a04-9360B5F6-5056-2306-D912111C06C3F830/FDGA05-SpecSheet.pdf TO-92 leads molded, narrow, drill 0.75mm (https://www.diodes.com/assets/Package-Files/TO92S%20(Type%20B).pdf TO-92S_Wide package, drill 0.75mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot371-1_po.pdf STC SOP, 16 Pin (http://www.ti.com/lit/ds/symlink/ldc1312.pdf#page=59), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 2.5 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00015, 5 pins, pitch 10mm, size 45x8.1mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-5-2.5-V-THR vertical pitch 3.5mm size 46.2x7mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix MKDS-1,5-6-5.08, 6 pins, pitch 5mm, size 20x12.5mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type067_RT01903HDWC, 3 pins, pitch 7.5mm, size 9.8x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Philmore THT Terminal Block Phoenix MPT-0,5-10-2.54 pitch 2.54mm DCDC-Converter, RECOM, RECOM_R-78HB-0.5L, SIP-3, Horizontally Mounted, pitch 2.54mm, hole diameter 1.2mm THT rectangular pad as test Point, square 3.0mm side length, hole diameter 1.3mm, wire diameter 0.5mm test point SMD pad as test Point, diameter 2.0mm, 2 pins, pitch 3.5mm, size 7.7x7mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type011_RT05503HBWC pitch 5mm size 50x10mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00018 pitch 5mm size 15x8mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-3-4-5.08 pitch 5.08mm size 81.3x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-205 45Degree pitch 5mm size 37.3x14mm^2.
New Pull Request