synth_tools

Back

Wuerth_HCI-1365, 12.8mmx12.8mm Inductor, Wuerth Elektronik, Wuerth_MAPI-4020, 4.0mmx4.0mm Inductor, Taiyo Yuden, MD series, Taiyo-Yuden_MD-2020, 2.0mmx2.0mm Inductor, Taiyo Yuden, MD series, Taiyo-Yuden_MD-3030, 3.0mmx3.0mm Inductor, Wuerth Elektronik, Wuerth_HCM-7050, 7.2mmx7.0mm Inductor, Wuerth Elektronik, WE-PD2, SMD, Typ M, Typ S, Handsoldering, https://katalog.we-online.com/pbs/datasheet/744778005.pdf Power Inductor, body 2x1.6mm, https://www.we-online.com/catalog/en/WE-LQSH#/articles/WE-LQSH-2010 Semi-Shielded High Saturation Power Inductor, SM-PIC0612H, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMPIC0602H.pdf Neosid Power Inductor SMD, Coilcraft LPS5030, https://www.coilcraft.com/pdfs/lps5030.pdf, StepUp generated footprint, https://www.infineon.com/cms/en/product/packages/PG-LLGA/PG-LLGA-5-1/ AKM Current Sensor, 7 pin, THT (http://www.akm.com/akm/en/file/datasheet/CQ-236B.pdf akm current sensor tht AKM Current Sensor, 7 pin, SMD (http://www.akm.com/akm/en/file/datasheet/CQ-236B.pdf akm current sensor tht AKM Current Sensor, 7 pin, SMD (http://www.akm.com/akm/en/file/datasheet/CQ-236B.pdf akm current sensor tht AKM Current Sensor, 7 pin, SMD (http://www.akm.com/akm/en/file/datasheet/CQ-236B.pdf akm current sensor smd AKM VSOP-24 current sensor, 5.6x7.9mm body, 0.65mm pitch (http://ww1.microchip.com/downloads/en/DeviceDoc/14L_VDFN_4_5x3_0mm_JHA_C041198A.pdf DE Package; 16-Lead Plastic DFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 3mm) (see Linear Technology 05081955_0_DHC18.pdf DHD Package; 16-Lead Plastic DFN (6mm x 5mm) (see Linear Technology DFN_8_05-08-1698.pdf DFN, 8 Pin (http://www.ti.com/lit/ds/symlink/tps62840.pdf#page=37), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-0810, with PCB locator, 10 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator JST EH series connector, SM11B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xx-DV-PE-LC, 10 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py 10-Lead Plastic DFN (5.55mm x 5.2mm), Pin 5-8 connected to shell ground, but not necessary for old fogeys like me to get 1:1 between schematic and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/ncj6fa-h-da Combo A series, 3 pole female XLR receptacle, grounding: without ground / shell contact, lateral left PCB mount, replaces NL4MD-H-2, https://www.neutrik.com/en/product/nl4mdxx-h-2 speakON Chassis Connectors, 2 pole combination of Covered Software is free of charge.

New Pull Request

Labels Milestones