Labels Milestones
BackHistory 1.0 2012-03-?? Initial release. */ // Four hole threshold (HP cv_in = [first_col, first_row, 0]; c_tune = [second_col, third_row, 0]; fm_in = [input_column + h_margin/2, bottom_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_2, 0]; cv_2b_atten = [right_col, row_5, 0]; cv_in_2a = [left_col, row_7, 0]; manual_1 = [left_col, row_5, 0]; cv_in_2a = [left_col, row_7, 0]; cv_in_1b = [right_col, row_5, 0]; audio_out_1 = [right_col, row_7, 0]; cv_in_1b = [right_col, row_3, 0]; manual_2 = [left_col, row_7, 0]; audio_out_1 = [right_col, row_5, 0]; audio_out_1 = [right_col, row_5, 0]; audio_out_1 = [right_col, row_5, 0]; audio_out_1 = [right_col, row_3, 0]; manual_2 = [left_col, row_6, 0]; audio_in_1 = [left_col, row_2, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; fm_pot = [input_column + h_margin/2, row_1, 0]; audio_out_2 = [right_col, row_2, 0]; triangle_out = [third_col, fifth_row, 0]; //right_rib_x = width_mm - col_right - thickness; // additives - labels, etc // one more vertical to mount the circuit board sideways on HP = 5.07; // 5.07 for a single 2.5 mm² wires, reinforced insulation, conductor diameter 0.4mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 3 times outer diameter.
New Pull Request