Labels Milestones
BackFill applied everywhere there isn't a trace already - use spokes where ground planes connect to holes - these gaps reduce heat conduction during soldering - ground plane on only one cross-board wire that shouldn't be over about 20mm in diameter at the first Schematics/SynthMages.pretty/3.5mm_jack_hole_nonpcb.kicad_mod Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/Wall_wart_A-4118.kicad_mod Normal file Unescape D Rotary switch, 4-bit encoding, 10 positions, Gray code K rotary bcd Gray D 1x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 5x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D Switch, three position, dual pole double throw, separate symbols"/>