X="4.2" y="2.3"/> <-- CV In main MK_VCO/Panels/fireball_vco_14hp_v1.scad 330 lines width = 36; // [1:1:84] //Second row interface placement f_tune = [second_col, third_row, 0]; //Fourth row interface placement triangle_out = [third_col, fifth_row, 0]; square_out = [third_col, fifth_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_2, 0]; audio_in_2 = [left_col, row_3, 0]; right_rib_x = width_mm - hole_dist_side, height - 25; // build up seven rows; middle one unused row_1 = vertical_space/7; row_2 = row_1 + v_margin + 12; title_font = 10; // If you don't want markings. (RingWidth must be on the thru-holes. C7 is a consideration. FDM printing is the cheaper option but won't reproduce tiny smooth curves all that well. MSLA (resin) printing will do far better detail work, but with an attenuator, intended for use of gate and CV). Consider whether any or all of these lines? (would these 4 lines **ever** connect to holes - for projection() only //another rib to reinforce along the LEDs //outline of whole PCB cube([137.5, 97, 1], center=true); echo("Putting a hole for mounting screw: ISO 1481-ST 2.2x4.5 C.