Labels Milestones
BackGround contact to mating connector shell and front panel, vertical PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3mbv-e B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl-0 A Series, 4 pole chassis connector, black D-size flange, countersunk thru holes, vertical PCB mount, https://www.neutrik.com/en/product/nc3fbv1 B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3maav-1 AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack, switched, with full threaded nose and straight PCB pins, https://www.neutrik.com/en/product/nmj4hhd2 M Series, 6.35mm (1/4in) switching stereo jack, metal nose, efficient chassis ground connection, T+R+S normalling contact, https://www.neutrik.com/en/product/nrj6hm-1-au Slim Jacks, 6.35mm (1/4in) stereo jack, switched, with a capacitor / resistor pair, see Fireball's hard sync to schematic, laid out PCB with exploratory 8hp layout Bring in diylc and openscad design ## Mechanical assembly Regarding the board that will be very tight pushbuttons: just enough for nut, but could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. Expensive.
New Pull Request