- 2 x switching (normalling) stereo jack and switching ground contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mah-0 A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, gold plated contacts, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hh-1 Slim Jacks, 6.35mm (1/4in) stereo jack (T/R/S), https://www.neutrik.com/en/product/nj3fd-v 6.35mm (1/4 in) Vertical Jack, 3 x 3 mm, 0.5 mm pitch, ultra thin SMD package; 3 leads; body: 4.3x6.1x0.43mm, https://www.vishay.com/docs/95570/to-277asmpc.pdf 3-pin TSOT23 package, http://cds.linear.com/docs/en/packaging/SOT_6_05-08-1636.pdf TSOT-23-6 MK06A TSOT-6 Hand-soldering TSOT, 8 Pin (http://www.ti.com/lit/ds/symlink/tps82130.pdf#page=19), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP44: plastic thin shrink small outline package; 18 leads; body width 3 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot519-1_po.pdf SSOP16: plastic shrink small outline package; 48 leads; body width 4.4 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot487-1_po.pdf HTSSOP, 38 Pin (http://www.ti.com/lit/ds/symlink/tlc5951.pdf#page=47&zoom=140,-67,15), generated with kicad-footprint-generator Soldered wire connection, for 3 times outer diameter, generated with kicad-footprint-generator Resistor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator Soldered wire connection, for 5 times 0.75 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.5mm, size 17.5x6.5mm^2, drill diamater 1.3mm, pad diameter.
alt
click/enter