Labels Milestones
Backsynth_mages/MK_VCO#7 Updates from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc5fah-0 A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbh-b B Series, 5 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fahr2 A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3mah A Series, 3 pole female XLR receptacle, grounding: separate ground contact connected to shell ground, but not that small - C7 is a ceramic 104 power cap like C5, C6, C8 | 4 README.md | 3 | 1k | Resistor | | | J1 | 1 | 1 | LED | Light emitting diode, 5 mm Small Signal NPN Transistor, TO-92 | | U3 | 1 | 100k | Resistor | | S3 | 1 | LED | Light emitting diode Push button switch, generic, two pins Switch, single pole double throw, separate symbols"/>