Labels Milestones
BackPanel(h) { width_mm = 70.8; // 14HP×5.08mm = 71.12; ES for 14HP is 70.8 first_row = 25.65; //mm second_row = 47.25; //mm third_row = 65.75; //mm fourth_row = 88.25; //mm fifth_row = 108.75; //mm // Center adjust to shift left and right columns toward the center center_adjust = 2.5; rail_clearance = 9; // mm from very top/bottom edge and where it is safe to put the output jacks 7f9b624c8e tweaks layout with input from sam Latest commits for file Schematics/OttosIrresistableDance/OttosIrresistableDance.kicad_pcb b0f8ee4ade Go to file 5e32fb4fc0 Change transistor footprint to inline_wide, fix DRC ground plane on only one cross-board wire is needed, vs 3 if the PCB enough for nut, but could work with printed spacers mini toggle: ample space above 11.75mm (existing 1p12t rotaries, use 11.25mm holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf 44-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x1.98mm pin-PCB-offset 8.35mm mounting-holes-distance 25mm mounting-hole-offset 25mm 9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x1.98mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf 62-pin D-Sub connector edge mount solder cup male x-pin-pitch 2.77mm mounting holes with circular drills, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html Alps rotary encoder, EC12E... With switch, vertical shaft, mounting holes distance 63.5mm 44-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm 15-pin D-Sub connector, horizontal/angled (90.
- Unescape Hardware/PCB/precadsr/ao_tht.pretty/SOT-23_Handsoldering.kicad_mod Normal file Unescape Hardware/PCB/precadsr/Kosmo_panel.pretty/Kosmo_Panel_Mounting_Hole_NPTH.kicad_mod Normal file.
- 9.725134e+01 5.287072e+00 facet normal 0.525867 0.615696.