synth_tools

Back

Addressable Kingbright, dual LED, red-green, dome lens, 3.2 x 2.4 mm Surface Mount Slide Switch, right-angle, https://www.ckswitches.com/media/1424/pcm.pdf 0 Littlefuse 14.73x2.54mm, 175VDC 5W, SPDT Reed Switch CT10-XXXX-G2 Coto Technologies SPST Reed Switch CT05-XXXX-G1 Coto Reed SPST Switch Coto Technologies SPST Reed Switch CT05-XXXX-G1 Coto Reed SPST Switch Coto Technologies SPST Reed Switch CT10-XXXX-G4 ALPS 5.2mm Square Low-profile Type (Surface Mount) SKQG Series, With stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAFE010.html ALPS 5.2mm Square Low-profile Type (Surface Mount) SKQG Series, With stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAFE010.html ALPS 5.2mm Square Low-profile Type (Surface Mount) SKQG Series, Without stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAEE010.html TL3305 Series Tact Switch with High Contact Reliability, Side-actuated Model, with Ground Terminal Middle Stroke Tactile Switch for High-Density Mounting, 4.3mm height, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3fs.pdf Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89003xx, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Mounting Hardware, inside blind hole M1.6, height 3.5, Wuerth electronics 9774010633 (https://katalog.we-online.com/em/datasheet/9774010633.pdf), generated with kicad-footprint-generator Mounting Hardware, external M3, height 9, Wuerth electronics 9775066960 (https://katalog.we-online.com/em/datasheet/9775066960.pdf), generated with kicad-footprint-generator Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py HTSSOP, 20 Pin (https://www.ti.com/lit/ds/symlink/ts3ds10224.pdf#page=29), generated with kicad-footprint-generator Hirose series connector, BM15B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794374-x, 1 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Hirose DF13C SMD, CL535-0403-5-51, 3 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator connector JST EH series connector, S3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-BE-A, 23 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator Soldered wire connection, for 3 times outer diameter, generated with kicad-footprint-generator Hirose DF11 through hole, DF63-6P-3.96DSA, 6 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-132 , 2 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator connector wire 1sqmm strain-relief Soldered wire connection with feed through strain relief, for 4 times 1.5 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1.7mm, outer diameter 2.1mm.

New Pull Request

Labels Milestones