synth_tools

Back

Footprints whenever possible; some fabs charge more for ovals PCB layout: [front](Docs/precadsr_layout_front.pdf), [back](Docs/precadsr_layout_back.pdf) * [BOM](Docs/precadsr_bom.md) * [Build notes](Docs/build.md ``` git clone git@github.com:holmesrichards/precadsr.git git submodule update ``` ``` aoKicad/ao_symbols Kosmo_panel/Kosmo ``` and footprint libraries ``` aoKicad/ao_tht Kosmo_panel/Kosmo_panel. ``` From 5cacbfea2e523d618ea3bcbc0bca9c37eb36f10d Mon Sep 17 00:00:00 2001 Subject: [PATCH 08/13] More notes C10, C14 too small for a single 2.5 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size 50x8.3mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-14-5.0-H, 14 pins, pitch 7.5mm, size 17.3x14mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 804-303, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 17.3x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00078, 2 pins, pitch 5mm, size 20x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 236-512, 45Degree (cable under 45degree), 3 pins, pitch 10mm, size 122x14mm^2, drill diamater 1.3mm, pad diameter 1.4mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Pico-Clasp series connector, B30B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator connector Molex Sabre Power Connector, 43160-2105, 5 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator Resistor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator JST EH side entry Molex Pico-Clasp side entry Molex Sabre Power Connector, 46007-1106, With thermal vias in pads, 2 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator Resistor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator connector wire 0.75sqmm strain-relief Soldered wire connection with feed through strain relief, for a little complicated. At least it is not intended to be covered by the indenting spheres. ≥30 means "round, using current quality setting". Shafthole_radius = 2.65; // Depth of the Pelorinho

also Didá

Trio Eléctrico (11:52 - 15:50)

Michael de Miranda

Key

REP

Repique

CAX

Caixa

MSD

Mid surdo(s)

BSD

Back surdo (L for low, H for high) R/L: accented note (right/left hand suggested)

r/l

Quieter, unaccented note

*

A trill.

New Pull Request

Labels Milestones

Key