synth_tools

Back

Size 14x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect 360272, block size 4x4mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 0.9mm wire loop with bead as test Point, diameter 2.5mm SMD pad as test Point, square 2.5mm side length, hole diameter 1.3mm, wire diameter 1.0mm wire loop as test point, pitch 5.08mm, size 40.6x11.2mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type205_RT04505UBLC, 45Degree (cable under 45degree), 6 pins, pitch 5.08mm, size 15.2x11.2mm^2, drill diamater 1.1mm, pad diameter 3mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST ZE series connector, B32B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-0330, 3 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator JST XA series connector, B15B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Resistor SMD 1020 (2550 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 3.2mm, height 6.6, Wuerth electronics 9774040943 (https://katalog.we-online.de/em/datasheet/9774040943.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a single 0.25 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00082, vertical (cable from top), 14 pins, pitch 10mm, size 45x8.1mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-105, 45Degree (cable under 45degree), 8 pins, pitch 10mm, size 62.3x14mm^2, drill diamater 1.4mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-6-5.08 pitch 5.08mm size 20.3x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-305 45Degree pitch 10mm size 95x8.1mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-204, 45Degree (cable under 45degree), 4 pins, pitch 2.5mm, size 17.2x10mm^2, drill diamater 1.15mm, pad diameter 2.7mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP I, 28 pins, surface mount SMD Kemet EC2 signal relay DPDT non single coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf Kemet.

New Pull Request

Labels Milestones