3
1
Back

3 * https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M * The 16 mm vertical board mount | | | S1 | 1 | 3_pin_Molex_connector | 3 | 4.7k | Resistor | | Screws and spacers (see [build notes](build.md | | | | Screws and spacers (see [build notes](build.md | | Tayda | A-2939 | | | | | | | J9 | 1 | Conn_01x07 | \*(optional) SIP socket, 2.54 mm, 1x4 Light emitting diode | | Tayda | A-3588 | | R8, R10, R12 | 3 | 2N3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, TO-92 | | | Screws and spacers (see [build notes](build.md | | Q1, Q2, Q3 | 3 | 1k | Resistor | | | | | D3, D4, D5, D6, D7, D8, D9, D10 | 8 | 1N4148 | 100V 0.15A standard switching diode, DO-35 | | U3 | 1 | SW_Push | Push button switch Off-On CuK sub miniature slide switch, EG series, DPDT, right angle, http://www.ckswitches.com/media/1428/os.pdf 1x-dip-switch SPST Copal_CVS-01xB, Slide, row spacing 7.62 mm (300 mils), body size 6.7x29.5mm (see e.g. Https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD SMD 8x-dip-switch SPST Copal_CHS-08B, Slide, row spacing 8.61 mm (338 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf 8x-dip-switch SPST Copal_CHS-08A, Slide, row spacing 7.62 mm (300 mils), body size 6.7x6.64mm (see e.g. Https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin SMD 5x-dip-switch SPST CTS_Series194-5MSTN, Piano, row spacing 7.62 mm (300 mils), see http://cdn-reichelt.de/documents/datenblatt/A400/HDBL101G_20SERIES-TSC.pdf DIL DIP PDIP 5.08mm 2.54 4-lead dip package with 1.27mm pin pitch, compatible with SOIC-8, 3.9x4.9mm² body, exposed pad, thermal vias, http://www.ti.com/lit/ds/symlink/drv8870.pdf 20-Pin Thermally Enhanced Thin Shrink Small Outline (ST)-4.4 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf DFN, 8 Pin (https://www.onsemi.com/pub/Collateral/NB3N551-D.PDF#page=7), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00023 pitch 10mm Varistor, diameter 12mm, width 7.9mm, pitch 7.5mm size 39.8x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-112, 45Degree (cable under 45degree), 1 pins, pitch 10mm, size 45x8.1mm^2, drill diamater 1.15mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00069, 4 pins, pitch 5mm, size 12.3x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block.

New Pull Request