synth_tools

Back

Connector, 10 pins, pitch 5mm, size 12.3x14mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-7-5.08 pitch 5.08mm size 40.6x10.6mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-3-16-5.08 pitch 5.08mm size 76.2x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-6-5.08 pitch 5.08mm length 3.04mm diameter 1.6mm Resistor, Axial_DIN0204 series, Axial, Horizontal, pin pitch=7.62mm, , length*diameter=26*9mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf Inductor Axial series Axial Horizontal pin pitch 15.00mm length 16.5mm width 4.7mm Capacitor C, Disc series, Radial, pin pitch=7.50mm, , length*width=10*4mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf C Rect series Radial pin pitch 2.50mm length 4.6mm width 3.0mm solder Pin_ diameter 1.0mm, hole diameter 1.3mm, wire diameter 1.0mm THT pad rectangle square THT rectangular pad as test Point, diameter 4.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 8.0mm 2 pins LED diameter 3.0mm z-position of LED center 1.6mm, 2 pins LED, diameter 5.0mm z-position of LED center 1.6mm 2 pins LED Round FlatTop diameter 3.0mm z-position of LED center 3.0mm, 2 pins, pitch 5mm, size 25x12.6mm^2, drill diamater 1.3mm, pad diameter 2.7mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 26-60-4020, 2 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py VQFN, 24 Pin (http://www.alfarzpp.lv/eng/sc/AS3330.pdf), generated with kicad-footprint-generator Hirose DF12C SMD, DF12C3.0-50DS-0.5V, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 0.1 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 2 mm² wires, reinforced insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 20 Pin (http://www.ti.com/lit/ml/mpqf239/mpqf239.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 1.5 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Hirose DF11 through hole, DF13-07P-1.25DSA, 7 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam.

New Pull Request

Labels Milestones