Labels Milestones
BackAnd v2
Added schmancy pcb for v1 build - C1 is too small; need more than the SPDT switch, needed a nut behind the front panel. Possibly do as an edge cut? Corrected in Rev 2.0 alpha 1: Properly assign potentiometer pads and trace routing to de-bodge the pots. D5bfb6e27b 's notes on repique/caixa, two or three for surdos Add schematic, start on PCB Fireball/Fireball.kicad_sch | 1313 This won't be easy; need both A1M (x3) and B10K (x1) sliders in the same form factor, with maybe a little bit of margin 76dd29636a Checkpoint in case of crashes Fix getting a bunch of wires backwards Fix floating pin for Pause (J19/J18); the schematic is incorrect Ins: Clock In - U1-13 (can get at from top when assembled - Stop Switch - 10 ohms between U1-14 and U2-1 when off, more like 1M when off Single Step - 12V through 10k Ohms to U-1-14, more.- Time Stop / Temporal Stasis Unseen.
- Normal -0.6852 0.343403 0.64232.
- TRACO TEN20 Generic Traco THD 15WIN, 15W, THT.
- -0.435833 -0.815355 0.38111 vertex 4.11794 9.04239 2.94279.
- Size 22.2x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm.