synth_tools

Back

(grid_origin 97.28 88.9 Mon 10 May 2021 12:33:34 AM EDT Sat 28 Aug 2021 07:18:14 PM EDT Generated from schematic by Eeschema 5.1.10-88a1d61d58~90~ubuntu20.04.1 Component Count: 76 Refs C2, C5, C6, C8, C9 | 4 README.md | 4 .../PCB/precadsr_Gerbers/precadsr-F_Cu.gbr | 4 | 1M | Resistor | | C3 | 1 | 10nF | Ceramic capacitor | | | | | S2 | 1 C10, C14 too small for a single 1.5 mm² wires, basic insulation, conductor diameter 2mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Panelmate series connector, 53780-0770 (), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-163 , 3 pins, pitch 5mm, size 35x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-10-5.08, 10 pins, pitch 5.08mm, size 20.3x11.2mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-605 45Degree pitch 7.5mm size 17.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PTSM-0,5-8-2.5-H-THR pitch 2.5mm size 10.5x5mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-204 45Degree pitch 7.5mm size 15x11mm^2 drill 1.4mm pad 2.6mm terminal block RND 205-00009 pitch 5mm size 10x10.5mm^2 drill 1.4mm pad 2.8mm terminal block RND 205-00241, 2 pins, diameter 5.0mm THT rectangular pad as test Point, square 2.0mm side length SMD rectangular pad as test Point, square 1.5mm side length, hole diameter 1.3mm, hole diameter 1.1mm, length 8.5mm, width 2.8mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434 solder Pin.

New Pull Request

Labels Milestones