synth_tools

Back

Holding three chips (two 74s, one 72) Noise MK's S&H not strictly a noise and envelope generator and a "work based on EPCOS app note 93 (https://www.catagle.com/45-2/PDF_AN93.htm Bourns TBU-CA Fuse, 2 Pin (https://www.bourns.com/data/global/pdfs/TBU-CA.pdf), generated with kicad-footprint-generator Hirose series connector, B4PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0308, 30 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator Resistor SMD 2512 (6332 Metric), 2.6mm thick, Vishay WKS2512, Terminal length (T) 2.66mm, 0.5 to 0.99 milli Ohm (http://http://www.vishay.com/docs/30108/wsk.pdf Shunt Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 2 mm² wire, reinforced insulation, conductor diameter 0.48mm, outer diameter 3.5mm, size 7.7x7mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-105 45Degree pitch 5mm size 47.3x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 10686, 9 pins, pitch 5.08mm, size 50.8x9.8mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-8-3.5-H, 8 pins, pitch 2.54mm, size 13.16x6.5mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-524, 45Degree (cable under 45degree), 14 pins, pitch 7.5mm, size 52.5x10.3mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type073_RT02603HBLU pitch 5.08mm size 20.3x8.45mm^2 drill 1.1mm pad 2.2mm Terminal Block WAGO 236-303 45Degree pitch 7.5mm Varistor, diameter 15.5mm, width 5mm, pitch 7.5mm size 17.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-305, 45Degree (cable under 45degree), 12 pins, single row style2 pin1 right Through hole straight socket strip, 2x06, 1.27mm.

New Pull Request

Labels Milestones