Labels Milestones
Back28.4x6.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00052 pitch 5mm size 45x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-2-3.5-H, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 2.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LED15MMGE_LED15MMGN%23KIN.pdf LED_SideEmitter_Rectangular Rectangular SideEmitter Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-47XEC(Ver.9A).pdf LED Round Rectangular size 5.0x2.0mm^2 z-position of LED center 1.6mm 2 pins LED, diameter 10.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-47XEC(Ver.9A).pdf LED Round FlatTop Rectangular size 3.9x1.9mm^2, 2 pins, pitch 5.08mm, size 20.3x8.45mm^2, drill diamater 1.5mm, 1 pads, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix MKDS-3-16-5.08 pitch 5.08mm length 24mm width 8.3mm Capacitor C, Rect series, Radial, pin pitch=5.00mm, , length*width=7.2*7.2mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf C Rect series Radial pin pitch 15.00mm length 18mm width 9mm Capacitor C, Rect series, Radial, pin pitch=5.00mm, , diameter=14mm, Electrolytic Capacitor CP Radial series Radial pin pitch 22.4mm 4W length 20mm width 6.4mm height 6.4mm Resistor, Axial_Power series, Box, pin pitch=86.36mm, 17W, length*width*height=75*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf Resistor Axial_Power series Axial Vertical pin pitch 5.08mm size 20.3x11.2mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-6-3.5-H, 6 pins, pitch 5.08mm, size 15.2x10.6mm^2, drill diamater 1.15mm, pad diameter 2.5mm, hole diameter 0.7mm, length 6.5mm, width 1.8mm solder Pin_ with flat with fork, hole diameter 0.7mm THT pad as test Point, square 2.5mm side length, hole diameter 0.7mm THT pad THT pad as test Point, diameter 2.0mm, 2 pins, pitch 3.5mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Mounting Hardware, inside through hole 3.3mm, height 10, Wuerth electronics 9774060360 (https://katalog.we-online.de/em/datasheet/9774060360.pdf), generated with kicad-footprint-generator JST ZE series connector, B05B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator Hirose DF63 through hole, DF63M-2P-3.96DSA, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV-LC, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Hirose DF13C vertical Hirose DF13 through hole, DF11-28DP-2DSA, 14 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator Molex Panelmate series connector, B03B-JWPF-SK-R (http://www.jst-mfg.com/product/pdf/eng/eJWPF1.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 0.25 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 1.7mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend.
New Pull Request