synth_tools

Back

20mm length 12mm diameter 7.5mm C, Axial series, Axial, Horizontal, pin pitch=25.4mm, 2W, length*diameter=17*6mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf Resistor Axial_DIN0414 series Axial Horizontal pin pitch 12.7mm length 9mm diameter 8mm Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=3.04*1.6mm^2, , https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf Diode DO-34_SOD68 series Axial Horizontal pin pitch 10.00mm length 11.5mm width 11.5mm Neosid NE-CPB-11EN Drill1.3mm Inductor, Radial series, Radial, pin pitch=3.50mm, diameter=8mm, height=7mm, Non-Polar Electrolytic Capacitor CP Axial series Axial Vertical pin pitch 15.00mm length 16.5mm width 9.2mm Vishay TJ3 L_Toroid, Vertical series, Radial, pin pitch=2.50mm, , diameter=13mm, Electrolytic Capacitor CP, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=30*8mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf Inductor Axial series Axial Horizontal pin pitch 5.08mm size 20.3x9.8mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type175_RT02704HBLC pitch 7.5mm Varistor, diameter 12mm, width 4mm, pitch 7.5mm size 21.5x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-606, 45Degree (cable under 45degree), 2 pins, pitch 10mm, size 122x14mm^2, drill diamater 1.4mm, pad diameter 2.4mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Mini-Fit Sr. Power Connectors, old mpn/engineering number: 5566-04A, example for new mpn: 39-28-924x, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Capacitor SMD Kemet-X (7343-43 Metric), IPC_7351 nominal, (Body size from: https://www.vishay.com/docs/48064/_t58_vmn_pt0471_1601.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a single 0.25 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Hirose DF12C SMD, DF12C3.0-50DS-0.5V, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf.

New Pull Request

Labels Milestones