Labels Milestones
Back10.2mm size 55.9x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-304, 45Degree (cable under 45degree), 6 pins, pitch 3.5mm, size 35x7.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type175_RT02705HBLC, 5 pins, pitch 7.5mm, size 90x10.3mm^2, drill diamater 1.3mm, pad diameter 2.3mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection, for a single 0.25 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.1 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Sabre Power Connector, 43160-0105, With thermal vias in pads, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator 4UCON 10156 Card edge socket with amplifier to handle weaker (<6v) signals Clock out socket, with option to send CV; could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. *** Expensive, about $3 each. *** Replacing LEDs in sliders, lit for each key. Build a MIDI->CV module ** Hagiwo's cheap arduino version and https://github.com/elkayem/midi2cv which it was added to the fab Precision ADSR build notes A-1605 * Fit SIP socket for\nsocketing capacitors C13.
New Pull Request