Labels Milestones
BackText Things best left to external modules: - CV-controlled clock. Presumably the CV in that pauses the clock oscillilator an external module, with the setscrew hole, as seen at https://www.thingiverse.com/thing:3475324 * @todo Make the top_rounding() module. * @todo Add support for more shaft shapes (rectangular, gear shaped etc.). * @todo Add support for melt-in nuts that can be painted. CapType = 1; top_margin = (board_height - hole_vdist) / 2 + 3 + tolerance*8; right_panel_width = 12; hole_vdist = 44.5; hole_hdist = 65; hole_diameter = 2; left_col = 10 + center_adjust; right_col = width_mm - h_margin; out_row_1 = v_margin+12; row_2 = working_increment*1 + row_1; //special-case the knob is stopped by something mounted to the fab Precision ADSR with mods Light emitting diode | | | Tayda | A-001 | | | C2, C5, C6, C8, C9 | 4 Fireball/Fireball_panel.kicad_dru | 102 Fireball/Fireball_panel.kicad_prl | 2 pin Molex connector 2.54 mm 2x5 Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | | U1 | 1 | B10k | Potentiometer | | | | | L1 | 1 README.md | 1 | Conn_01x10 | Pin header 2.54 mm spacing"/>