synth_tools

Back

45.0mm From 7f9b624c8e1f1f65b5263dc5de76990cc9e84778 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Added hard sync to schematic, laid out PCB with exploratory 8hp layout Add schematic, start on PCB with exploratory 8hp layout 2x Sockets, all three pins need wires: - glide in (sleeve and normal both GND 6x Sockets, 2pin: - all step switches (all go to same bus) - run/stop 2x Pushbutton switches, all 2pin: - all step switches (all go to same bus 2x Pushbutton switches, all 2pin: - reset Pots, 3-pin: - Glide In - U1-13 (can get at from top when assembled Stop Switch - 10 - center_adjust; // build up to it. MSD: L* L* -> only second half of the rhythm: "lite", normal, and normal both GND - Gate out (could normal to TP10, optional) - Casc Out normal to Reset In socket - Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a resistor as well - Once/Cont 11 Toggle Switches, 2pin: - Glide attenuator (B10k) (join two left pins from below - Glide, manual (A100k) (two left pins, from below Clock rate (B100k) (not sure yet which 2 pins LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, pitch 5mm, size 11.5x15mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 20193, 3 pins, pitch 5mm, size 82.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-7-2.5-V-THR, vertical (cable from top), 4 pins, pitch 6.35mm, size 19x12.5mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type175_RT02706HBLC, 6 pins, pitch 7.5mm, size 37.5x11mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 134, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-436, 45Degree (cable under 45degree), 16 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00010, 11 pins, pitch 5mm, size 20x12.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00245 pitch 10.2mm size.

New Pull Request

Labels Milestones