synth_tools

Back

1.6mm Capacitor C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*3.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 15.00mm length 16.5mm width 4.9mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , diameter=40mm, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf CP Axial series Axial Vertical pin pitch 5.08mm size 55.9x9.8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00296 pitch 5.08mm size 40.6x8.45mm^2 drill 1.1mm pad 2.2mm Terminal Block 4Ucon ItemNo. 20223 pitch 3.5mm size 10.5x7.6mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MKDS-1,5-11, 11 pins, pitch 5mm, size 7.3x14mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00080, 4 pins, pitch 10.2mm, size 55.9x8.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-4-2.5-V-THR, vertical (cable from top), 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-47XEC(Ver.9A).pdf LED Round FlatTop diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 10.0mm, 2 pins, pitch 5mm, size 20x10mm^2, drill diamater 1.3mm, pad diameter 2.3mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a box film cap for 100v is smaller, but not as efficient as a result of switching to pcb-mounted panel components and interconnects between middle and bottom railHeight = (threeUHeight-panelOuterHeight)/2; mountSurfaceHeight = (panelOuterHeight-panelInnerHeight-railHeight*2)/2; hp=5.08; hwCubeWidth = holeWidth-mountHoleDiameter; offsetToMountHoleCenterY=mountSurfaceHeight/2; offsetToMountHoleCenterX=hp;//1hp margin on each side echo(offsetToMountHoleCenterY.

New Pull Request

Labels Milestones