synth_tools

Back

Sync input. But could also go to same bus run/stop 2x Pushbutton switches, all 2pin: - Glide attenuator (B10k) (join two left pins from below - Glide, manual (A100k) (two left pins, from below Clock rate (B100k) (not sure yet which 2 pins diameter 3.0mm z-position of LED center 1.6mm, 2 pins LED_Rectangular, Rectangular, Rectangular size 4.5x1.6mm^2, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-2774GD(Ver.7B).pdf LED_Rectangular Rectangular Rectangular size 3.0x2.0mm^2 2 pins LED, diameter 5.0mm 3 pins Ceramic Resomator/Filter 10.0x5.0mm^2 RedFrequency MG/MT/MX series, http://www.red-frequency.com/download/datenblatt/redfrequency-datenblatt-ir-zta.pdf, length*width=10.0x5.0mm^2 package, package length=8.0mm, package width=3.5mm, 3 pins LED diameter 5.0mm z-position of LED center 2.0mm, 2 pins, pitch 5mm, size 25x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00295, 10 pins, pitch 7.5mm, size 182x14mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 1.5 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator connector JST J2100 series connector, B03B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator connector Molex Mini-Fit_Jr top entryplastic_peg Molex Mini-Fit Sr. Power Connectors, old mpn/engineering number: 5569-18A2, example for new part number: A-41791-0003 example for new mpn: 39-30-0160, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator JST EH series connector, S15B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py HVQFN, 24 Pin (https://www.invensense.com/wp-content/uploads/2015/02/PS-MPU-9250A-01-v1.1.pdf#page=39), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 0.5 mm² wire, basic insulation, conductor diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10687.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-5-5.08, 5 pins, pitch 5mm, size 50x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-503, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 60x9.8mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00082 vertical pitch 5mm size 37.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Philmore , 2 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF Altech AK300 terminal block, pitch 5.08mm, size 15.2x8mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-5-5.08, 5 pins, pitch 5mm, size 122x15mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block Phoenix MKDS-1,5-6, 6 pins, pitch 5mm, size 42.3x14mm^2, drill diamater 1.2mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block 4Ucon ItemNo. 19964 pitch 3.5mm size 53.2x7mm^2 drill 1.2mm pad 3mm Terminal.

New Pull Request

Labels Milestones