Labels Milestones
Back804-114, 45Degree (cable under 45degree), 11 pins, pitch 9.52mm, size 28.6x12.5mm^2, drill diamater 1.3mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a little wiggle room on the bottom //another rib to balance the switches along the LEDs //outline of whole PCB cube([137.5, 97, 1], center=true); echo("Putting a hole with radius: ", hole_r , " at ", hole_dist_side, height - hole_dist_top); echo("Putting a hole with radius: ", hole_r , " at ", hole_dist_side, height - v_margin*2 - title_font_size; Experimenting with more panel layout ideas working_height = height / 2 : jackHoleDiameter + horizontalJackHoleSpacing : hp*panelHp - horizontalJackHoleSpacing] module jackStorageHole(horizontalOffset, verticalOffset, diameter holes = holes-holes%2;// mountHoles ought to be able to add picture Schematics/{schematic_bugs_v1.txt => schematic_bugs_v1.md} | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS)"/>