Labels Milestones
BackWider holes for square, hexagonal etc. Shafts. ≥30 means "round, using current quality setting". // Height of the rail + a safety margin // margins from edges h_margin = hole_dist_side + thickness; width_mm = hp_mm(width); // where to put the output jacks output_column = width_mm - h_margin; cv_in = [input_column, row_2, 0]; triangle_out = [output_column, row_2, 0]; cv_2b_atten = [right_col, row_6, 0]; cv_1b_atten = [right_col, row_1, 0]; fm_pot = [input_column + h_margin/2, bottom_row, 0]; fm_in = [h_margin+working_width/8, row_3, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_3, 0]; pwm_duty = [input_column, row_2, 0]; fm_lvl = [h_margin+working_width/8, row_2, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; f_tune = [h_margin+working_width/8, row_2, 0]; cv_2b_atten = [right_col, row_2, 0]; triangle_out = [third_col, fifth_row, 0]; //left_rib_x = thickness * 1; h_wall(h=4, l=right_rib_x); // middle-bottom h rib pcb_holder(h=10, l=top_row-rail_clearance*2-15-thickness, th=1.15, wall_thickness=1); // lower h-rib reinforcer Panels/luther_triangle_10hp_rib_space_fixes.stl Normal file View File WARNING: There is a corner edge of a simple implementation. Can be done, but requires a lot of wiring and increases risk of noise on power rails. Things best left to external modules: - CV-controlled CV offset module - add a.
- Path="/607ED812/60C3833D" Ref="R21" Part="1" AR.
- Header, 2x37, 1.27mm pitch, double rows Surface.
- 12.5mm Resistor, Axial_Power series, Box, pin pitch=55.88mm.
- Traces, fix teardrops and gnd fill Embiggen traces.