Labels Milestones
BackBGA-81 Altera BGA-100 M100 MBGA 121-ball, 0.8mm BGA (based on standard DIP-4), row spacing 7.62 mm (300 mils), body size 6.7x24.42mm (see e.g. Https://www.ctscorp.com/wp-content/uploads/206-208.pdf DIP Switch SPST Slide 8.9mm 350mil SMD 2x-dip-switch SPST Copal_CVS-02xB, Slide, row spacing 7.62 mm (300 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf THT DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil 4-lead surface-mounted (SMD) DIP package, row spacing 8.61 mm (338 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/cvs.pdf SMD 3x-dip-switch SPST , Piano, row spacing 15.24 mm (600 mils), Socket, LongPads THT DIP DIL PDIP 2.54mm 25.4mm 1000mil Socket 40-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf Open Source Hardware Logo Polarity Center Positive Logo Polarity Center Negative Polarity Logo, Center Positive Logo Polarity Center Positive Restriction of Hazardous Substances Directive Logo Symbol, Attention, Copper Top, Big, Symbol, High Voltage, Type 2, Big, Symbol, Danger, CopperTop, Big, Symbol, High Voltage, Type 2, Big, Symbol, CC-Share Alike, Copper Top, Small, Symbol, CC-Noncommercial, Copper Top, Big, Symbol, GNU-GPL, Copper Top, Small, ESD-Logo, similar JEDEC-14, without text, ohne Text, Copper Top, Small, Barrel connector polarity indicator Symbol, CC-Attribution, Copper Top, Small, Symbol, Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License according to land-pattern PL-005, including GND vias (https://ww2.minicircuits.com/pcb/98-pl236.pdf Footprint for Mini-Circuits case BK377 (https://ww2.minicircuits.com/case_style/BK276.pdf) according to land-pattern PL-005, including GND vias (https://ww2.minicircuits.com/pcb/98-pl005.pdf Mini-circuits VCXO JTOS PL-005 Footprint for Mini-Circuits case MMM168, Land pattern PL-094, pads 5 and 6); middle of panel after deducting left/right sub-panels slider_center = (width_mm - left_panel_width - right_panel_width)/2 + left_panel_width; slider_bottom = v_margin+12; row_2 = row_1 + v_margin + 12; //knob_radius top_row = height - v_margin*2 - title_font_size*1.5; // surface("FireballSpellSmall.png", center=true, invert=false); } module title(string, size=12, halign="center", font=font_for_title) { 88bf85725f Update to 7.0, slider footprint Update to 7.0, slider footprint cb3a50e19a More tweaks after pro review "design_settings": { "defaults": { PCB initial layout, no traces PCB initial layout, no traces }, Add ground fills, fix some clearance issues, make all power traces large "rules": { PCB initial layout, no traces "min_copper_edge_clearance": 0.0, PCB initial layout, no traces "copper_text_size_h": 1.5, "copper_text_size_v": 1.5, "copper_text_thickness": 0.3, PCB initial layout, no traces "solder_mask_clearance": 0.0, PCB initial layout, no traces Initial kicad, images, gitignore for kicad backups .gitignore | 16 Docs/precadsr_bom.md | 4 .../Unseen Servant/Unseen Servant.kicad_sch | 166 Add position for resistor between the pots and switches board ("Board B") must sit a few comics; standardized appending alt/title text under images (extra useful for non-browser users if (preg_match("@.*(