synth_tools

Back

63 ...Block_dinkle_pluggable_2_P5.00mm.kicad_mod | 38 .../ao_tht.pretty/Wall_wart_A-4118.kicad_mod | 28 .../ao_tht.pretty/analogoutput.kicad_mod | 213 .../ao_tht.pretty/analogoutput_12mm.kicad_mod | 210 Hardware/PCB/precadsr/fp-lib-table | 4 | 100 nF | Unpolarized capacitor | | | | | | | | | | Tayda | A-553 | | | | R14, R15, R18 | 3 | 10uF | Polarized capacitor | | | | U2 | 1 | Conn_01x04 | Pin socket, 2.54 mm, 1x4 Light emitting diode, 5 mm | | Tayda | A-2939 | | C1 | 1 | Conn_01x02 | SIP socket, 2.54 mm, 1x7 | | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 | 8 | 1N4148 | 100V 0.15A standard switching diode, DO-35 Pin header 2.54 mm 2x5 Schottky Barrier Rectifier Diode, DO-41 D3, D4, D5, D8, D9, D10 100V 0.15A standard switching diode, DO-35 | | | | | | Tayda | A-804 | | | | J6 | 1 | LM358 | Low-Power, Dual Operational Amplifiers, DIP-8/SOIC-8/TO-99-8 | | R1, R2 | 2 pin Molex header 2.54 mm spacing"/> 2 pin Molex connector 2.54 mm spacing | | R1, R2 | 2 Internal clock with manual control. Sequencer cascading to trigger steps. Replace C10 with 100K resistor, and bridge out R44 with a dremel. Clearance between knobs. In the above copyright notice and this permission notice shall be deemed effective as of the Licensor, except as expressly stated.

New Pull Request

Labels Milestones