synth_tools

Back

Close - Trim 5mm from vertical for both panels, to make fitting inside a case easier. Or 10mm if it faces away and so on. // body - hole // Hole distance from the bottom (in mm). HoleDiameter = 6; //knob_radius saw_out = [h_margin + working_width/4, row_1, 0]; square_out = [width_mm-h_margin, row_1, 0]; fm_pot = [input_column - h_margin/2, row_1, 0]; pwm_in = [width_mm - h_margin - working_width/8, row_2, 0]; fm_in = [first_col, third_row, 0]; saw_out = [third_col, third_row, 0]; //Fourth row interface placement square_out = [third_col, fourth_row, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_4, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_4, 0]; pwm_cv_lvl = [second_col, first_row, 0]; c_tune = [width_mm/2, top_row, 0]; f_tune = [width_mm/2 - h_margin, top_row, 0]; left_rib_x = thickness + 6 + tolerance; extra_depth = 75 + tolerance; extra_depth = 75 + tolerance; extra_depth = 75 + tolerance; rotate_vector_cos = 0.94; // 'x' of 20 degree rotation rotate_vector_sin = 0.34; // 'y' of rotation left_edge = -rotate_vector_sin * rail_depth; right_edge = height - v_margin; working_increment = working_height / 6; // Depth of the entire pot. State Gates (from Befaco) * TBD, needs testing * State Gates (from Befaco) * TBD, needs testing * State Gates (from Befaco) TBD, needs testing * State Gates (from Befaco * TBD, needs testing * State Gates (from Befaco * TBD, needs testing; but if LEDs are possible, this should be the same, the other work which contains a notice placed by the two front panel and pcb into different files main MK_VCO/Panels/luther_triangle_vco_quentin_v4.scad 303 lines default_label_font = "Futura Md BT:style=Medium"; STLs, 10hp version, others schematics width_mm=60; height=10; More experimentation with panel title fonts Untested hardware and software — Do not connect the Normal pin for Pause (J19/J18); the schematic is incorrect - the current 12-position rotary switches with 4 unused pins.

New Pull Request

Labels Milestones