Labels Milestones
Back1x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows Through hole straight pin header, 2x09, 2.54mm pitch, 8.51mm socket length, double rows Through hole angled socket strip, 2x16, 2.00mm pitch, single row Surface mounted pin header THT 1x22 1.27mm single row style2 pin1 right Through hole socket strip SMD 2x13 1.00mm double row surface-mounted straight socket strip, 1x14, 2.00mm pitch, 4.2mm pin length, single row (from Kicad 4.0.7), script generated Through hole straight socket strip, 1x08, 2.00mm pitch, single row style2 pin1 right Through hole straight socket strip, 2x29, 2.00mm pitch, 6.35mm socket length, double rows Surface mounted pin header SMD 1x33 2.00mm single row male, vertical entry Harwin LTek Connector, 8 pins, pitch 5mm, size 15x10.2mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00030 pitch 10mm size 62.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-206, 45Degree (cable under 45degree), 48 pins, pitch 5mm, size 40x9.8mm^2, drill diamater 1.15mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex CLIK-Mate series connector, S30B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-BE-A, 23 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 2.5 mm² wire, basic insulation, conductor diameter 0.65mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00247, 8 pins, pitch 5mm, size 72.3x14mm^2, drill diamater 1.3mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.15 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.5mm, hole diameter 0.5mm test point THT pad as test point, loop diameter.
New Pull Request