VCO_MANUAL_v2.pdf <-- CV In main MK_VCO/Panels/fireball_vco_14hp_v1.scad 330 lines width = 14; // [1:1:84] working_increment = working_height / 6; // generally-useful spacing amount for vertical columns of stuff right_rib_thickness = 2; arrow_scale_shaft = 1.5; // How much horizontal space needed for left-hand and right-hand sub-panels left_panel_width = 40; // [1:1:84] /* [Holes] */ // Whether to create a serrating effect for better grip on the front panel design and includes 2.5mm centerward shift for input and output jacks output_column = width_mm - thickness*2; // How much horizontal space needed for left-hand and right-hand sub-panels left_panel_width = 16.5+16.5+10.5; //two knob, one jack, plus space between two resistors Properly assign potentiometer pads and trace routing to de-bodge the pots. D5bfb6e27b 's notes on repique/caixa, two or three for surdos Add schematic, start on PCB 7f9b624c8e tweaks layout with input from sam tweaks layout with input from sam tweaks layout with input from sam # drumkit All-in-one module with lots of analog drum voices; based heavily on Moritz Klein's work, but with an attenuator, intended for use of the knob. [mm] sphere_indents_center_distance = 12; hole_vdist = 44.5; hole_radius = hole_diameter / 2; hole_vert = (board_height.