Labels Milestones
BackMKDS-1,5-9, 9 pins, pitch 5mm, size 42.3x14mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-10-5.08 pitch 5.08mm 0.167W length 3.6mm diameter 1.6mm Resistor, Axial_DIN0204 series, Axial, Horizontal, pin pitch=25mm, , length*diameter=17*7.0mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf C Axial series Axial Horizontal pin pitch 7.62mm simple 2-pin terminal block, pitch 5.08mm, size 20.3x9.8mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00011, 12 pins, pitch 5mm, size 25x12.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-503, 45Degree (cable under 45degree), 2 pins, diameter 5.0mm z-position of LED center 1.6mm 2 pins Rectangular size 4.5x1.6mm^2 2 pins LED, Round, FlatTop, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins C1: enlarge footprint; a box film cap for 100v is smaller, but not necessary for old fogeys like me to get proper hole sizes threeUHeight = 133.35; //overall 3u height panelInnerHeight = 110; // rail clearance issues, add PCB slot.
- 0.0975513 0.0975338 facet normal 3.267696e-001 5.718465e-001.
- 0.725378 0.0991494 facet normal -0.643667 0.528237.
- Thickness * 1; //right_rib_x = width_mm.