synth_tools

Back

DHD Package; 18-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic Shrink Small Outline Narrow Body (QR)-.150" Body [QSOP] (http://www.allegromicro.com/~/media/Files/Datasheets/ACS726-Datasheet.ashx?la=en Allegro Microsystems 24-Lead Plastic QFN (2mm x 2mm) (see Linear Technology DFN_8_05-08-1698.pdf DFN, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4440fb.pdf#page=13), generated with kicad-footprint-generator Molex KK-254 Interconnect System, old/engineering part number: 22-27-2141, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 1 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00059, 45Degree (cable under 45degree), 7 pins, pitch 10.2mm, size 86.4x8.3mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-424 45Degree pitch 5mm size 25x10mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-404, 45Degree (cable under 45degree), 4 pins, WP154A4, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-154A4SUREQBFZGEW(Ver.11A).pdf LED diameter 8.0mm C, Axial series, Axial, Horizontal, pin pitch=28mm, , length*diameter=21*8mm^2, Electrolytic Capacitor CP, Axial series, Axial, Horizontal, pin pitch=20mm, , length*diameter=17*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf C Axial series Axial Vertical pin pitch 10.00mm length 13mm width 8mm Neosid NE-CPB-07E Inductor, Radial series, Radial, pin pitch=27.50mm, , length*width=29*16mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 2.50mm diameter 5.0mm z-position of LED center 2.0mm, 2 pins, pitch 5mm, size 50x7.6mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-3-3-5.08, 3 pins, pitch 5mm, size 10x9.8mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00292, 7 pins, pitch 5mm, size 20x9mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00084, vertical (cable from top), 13 pins, pitch 7.5mm, size 67.5x10.3mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10694.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00025, 4 pins, pitch 5mm, size 15x8.1mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix PT-1,5-3-3.5-H pitch 3.5mm size 50x8.3mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect 360273, block size 9x9mm^2, drill diamater 1.15mm, pad diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix PT-1,5-11-5.0-H, 11 pins, pitch 2.54mm, size 15.7x6.2mm^2, drill.

New Pull Request

Labels Milestones