synth_tools

Back

Is actually a pushbutton momentary, but roughly same dimensions as toggle switch - this needs measuring, and leaving space for a single 2.5 mm² wire, reinforced insulation, conductor diameter 0.4mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-601, 45Degree (cable under 45degree), 48 pins, pitch 5mm, size 45x9.8mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix MKDS-1,5-6 pitch 5mm size 15x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00032, 11 pins, pitch 5mm, size 55x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00299, 3 pins, pitch 5mm, size 40x9mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block 4Ucon ItemNo. 10700, vertical (cable from top), 3 pins, pitch 10mm, size 25x8.1mm^2, drill diamater 1.2mm, pad diameter 2.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 56 Pin (http://www.ti.com/lit/an/scea032/scea032.pdf#page=4), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-5010, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 2.5 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 236-301 45Degree pitch.

New Pull Request

Labels Milestones