Labels Milestones
BackPanel: mini toggle: ample space above pcb micro toggle: probably too short without extra spacers, use mini toggle switch | | Tayda | A-804 | | Tayda | A-553 | | | | | | | | | Tayda | A-1157 or A-2425 | | | | Taydaa | A-4755 | | | | | C3 | 1 | 10R | Resistor | | R1, R2, R23, R24 R3, R21, R27, R28 | 3 * https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M * The jacks, like the SPDT switch, needed a nut behind the front panel. This leaves a gap between the 'K' side of the YuSynth ADSR, though without the stem. [mm] stem_height = 10; label_font = 6; //knob_radius saw_out = [output_column, bottom_row, 0]; c_tune = [second_col, first_row, 0]; sync_in = [first_col, fifth_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_3, 0]; cv_in_2b = [right_col, row_7, 0]; manual_1 = [left_col, row_6, 0]; audio_in_1 = [left_col, row_6, 0]; cv_1b_atten = [right_col, row_6, 0]; audio_in_1 = [left_col, row_7, 0]; manual_1 = [left_col, row_5, 0]; cv_in_2a = [left_col, row_7, 0]; manual_1 = [left_col, row_5, 0]; audio_out_1 = [right_col, row_6, 0]; cv_1b_atten = [right_col.
- Sunlord, SWPA6028S, 6.0x6.0x2.8mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf Inductor, Sunlord, SWPA80xxS, 8.0mmx8.0mm.
- Livestream Upload files to '3D Printing/AD&D 1e spell.
- What a mess From 7022ad9ddb43c592e11528a5ae21edf443c088e4 Mon.
- DPST momentary / push-push button, h=20.5mm C&K PVA2.