Labels Milestones
Back2.5/3-H-5.0 Terminal Block, 1719341 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719341), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xx-DV-PE-LC, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator JST PUD series connector, 502386-1170 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/436412f.pdf#page=22), generated with kicad-footprint-generator Soldered wire connection, for 2 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-13, 13 pins, pitch 10mm, size 62.3x14mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-424, 45Degree (cable under 45degree), 10 pins, pitch 3.5mm, size 18.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.3mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 1.5mm, hole diameter 1.2mm THT rectangular pad as test Point, diameter 5.0mm z-position of LED center 9.0mm, 2 pins LED diameter 5.0mm z-position of LED center 3.0mm, 2 pins, pitch 7.5mm, size 37.5x11mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10689, 12 pins, pitch 7.5mm, size 32.3x14mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00087, vertical (cable from top), 10 pins, dual row male, vertical entry, no latches, PN:G125-MVX2005L0X Harwin Gecko Connector, 16 pins, pitch 3.5mm, size 21.7x7mm^2, drill diamater 1.2mm, pad diameter 2.7mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-0610, with PCB locator, 15 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog⟨=en&documentid=D31688_en), generated with kicad-footprint-generator Hirose DF12C SMD, DF12C3.0-10DS-0.5V, 10 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py VQFN, 46 Pin (http://www.ti.com/lit/ds/symlink/lp5036.pdf#page=59), generated with kicad-footprint-generator Hirose DF11 through hole, DF11-32DP-2DSA, 16.
New Pull Request