synth_tools

Back

Epson Toyocom TSX-3225 series https://support.epson.biz/td/api/doc_check.php?dl=brief_fa-238v_en.pdf, hand-soldering, 3.2x2.5mm^2 package SMD Crystal MicroCrystal CC1V-T1A series https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/CC1V-T1A.pdf, 8.0x3.7mm^2 package SMD Crystal Seiko Epson SG-8002CA https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC, 7.0x5.0mm^2 package SMD Resomator/Filter 7.2x3.0mm, Murata CSTCC8M00G53-R0; 8MHz resonator, SMD, Farnell (Element 14) #1170435, http://www.farnell.com/datasheets/19296.pdf?_ga=1.247244932.122297557.1475167906, hand-soldering, 7.2x3.0mm^2 package SMD Crystal Qantek QC5CB, https://www.qantek.com/tl_files/products/crystals/QC5CB.pdf crystal Epson Toyocom FA-128 (https://support.epson.biz/td/api/doc_check.php?dl=brief_FA-128⟨=en), 2x1.6mm^2 package Diode SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xx-DV-PE-LC, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex PicoBlade side entry Molex Nano-Fit Power Connectors, 42819-22XX, 2 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator JST SH series connector, 502386-0470 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV-BE, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 0.25 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.5mm, size 42x7.6mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-6-2.5-H-THR, 6 pins, pitch 5mm, size 40x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-4-2.5-H-THR pitch 2.5mm size 14.7x10mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-608, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 27.3x14mm^2, drill diamater 1.5mm, 1 pads, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-13-5.0-H, 13 pins, pitch 5mm, size 10x7.6mm^2, drill diamater 1.3mm, pad diameter 2.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Tantalum Capacitor SMD Kemet-D (7343-31 Metric), IPC_7351 nominal, (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator Hirose DF11 through hole, DF11-4DP-2DSA, 2 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-138 , 8 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator Resistor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 2.7mm, height 7, Wuerth electronics 97730406330 (https://katalog.we-online.com/em/datasheet/97730406330.pdf), generated with kicad-footprint-generator Hirose DF12C SMD, DF12C3.0-30DS-0.5V, 30 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator Mounting Hardware, external M3, height 2.6, Wuerth electronics 9774015943 (https://katalog.we-online.de/em/datasheet/9774015943.pdf), generated with kicad-footprint-generator connector JAE side entry Molex Pico-Lock series connector, BM08B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf.

New Pull Request

Labels Milestones