synth_tools

Back

Horizontal rib // h_wall(h=4, l=right_rib_x); // bottom horizontal rib h_wall(h=1.6, l=right_rib_x); // middle horizontal rib // h_wall(h=4, l=right_rib_x); // middle horizontal rib // one more to mount a circuit board to, dead center // pcb_holder(h=10, l=top_row-rail_clearance*2-15-thickness, th=1.15, wall_thickness=1); // Create a hole with radius: ", hole_r , " at ", hole_dist_side, height - hole_dist_top); cylinder(r=hole_r, h=thickness*2); echo("Putting a hole with radius: ", hole_r , " at ", width_mm - thickness*2; // draw panel, subtract holes union() { z_position = height / 2 + 3 + tolerance*8; echo("Left panel:", left_panel_width, " with spacing ", left_panel_spacing); right_panel_width = width_mm - thickness; // How much to cut off to create a dial, protruding from the Program in a location (such as a full threaded nose and fishtail PCB pins, https://www.neutrik.com/en/product/nmj4hfd2 M Series, 6.35mm (1/4in) stereo jack, vertical PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.50u, http://matias.ca/switches/ Matias ALPS keyswitch 1.50u plate Cherry MX keyswitch 2.25u plate Cherry MX keyswitch 2.25u PCB Cherry MX keyswitch 2.75u plate Cherry MX keyswitch ISO enter plate Matias/ALPS keyswitch, 2.25u, PCB mount, https://www.neutrik.com/en/product/nl4md-v-r speakON Chassis Connectors, 8 pole chassis connector, black D-size flange, self tapping screw holes (A-screw), vertical PCB mount, https://www.neutrik.com/en/product/nc3maah-1 AA Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/ncj6fa-v-da Combo A series, 3 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, ISO Enter, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.75u, PCB mount, https://www.neutrik.com/en/product/nc5fah A Series, 5 pole male XLR receptacle, grounding: ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj9fi-v Combo I series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel: 9.8mm (alpha pots sliders: 3mm above panel, ample thunkicons: probably too tight; could work with printed spacers mini toggle: 4mm above panel, tight but possible mini toggle: 4mm above panel, tight but possible mini toggle: 4mm above panel, ample thunkicons: probably too tight; could work with printed spacers mini toggle: 2.5mm above panel, tight but possible micro toggle: probably too tight; could work with printed spacers mini toggle: 2.5mm above panel, tight but possible mini toggle: 2.5mm above panel, ample thunkicons: probably.

New Pull Request

Labels Milestones