Labels Milestones
Back0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Diode SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator Hirose DF11 through hole, DF13-02P-1.25DSA, 2 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator connector wire 2.5sqmm strain-relief Soldered wire connection with feed through strain relief, for 4 times 2.5 mm² wires, basic insulation, conductor diameter 0.9mm, length 10.0mm, width 3.5mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434 solder Pin_ with flat with hole, hole diameter 1.5mm wire loop bead wire loop bead wire loop as test Point, square 2.5mm side length SMD rectangular pad as test point, loop diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 236-305 45Degree pitch 5mm size 45x10mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00060, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 40x12.6mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector http://www.phoenixcontact.com/us/products/1814715/pdf PhoenixContact PTSM0.5 4 2.5mm vertical SMD spring clamp terminal block RND 205-00073, 8 pins, pitch 10mm, size 32.3x14mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block Metz Connect Type101_RT01603HBWC pitch 5.08mm size 15.2x11.2mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-7-5.0-H pitch 5mm size 30x8.1mm^2 drill 1.1mm pad 2.1mm Terminal Block Phoenix PT-1,5-15-3.5-H pitch 3.5mm size 46.2x7mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix PTSM-0,5-5-2.5-H-THR, 5 pins, pitch 10mm, size 95x10.3mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 236-212 45Degree pitch.
New Pull Request