synth_tools

Back

X="4.7" y="2.1"/> 10k NTC Thermistor <-- CV In main MK_VCO/Panels/fireball_vco_14hp_v1.scad 330 lines width = 24; // [1:1:84] // Four hole threshold (HP // margins from edges h_margin = hole_dist_side + thickness; v_margin = hole_dist_top*2; width_mm = 70.8; // 14HP×5.08mm = 71.12; ES for 14HP is 70.8 c_tune = [second_col, third_row, 0]; fm_lvl = [second_col, fourth_row, 0]; pwm_in = [first_col, first_row, 0]; sync_in = [first_col, third_row, 0]; //Fourth row interface placement pwm_in = [first_col, fourth_row, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_3, 0]; manual_2 = [left_col, row_2, 0]; pwm_in = [input_column - h_margin/2, bottom_row, 0]; c_tune = [width_mm/2 + h_margin, top_row, 0]; f_tune = [second_col, third_row, 0]; fm_lvl = [h_margin+working_width/8, row_2, 0]; fm_lvl = [second_col, fifth_row, 0]; //right_rib_x = width_mm - thickness*2; // draw a "vertical" wall // h = engraved_indicator_depth * 2, $fn = smooth // outer pointy indicator // cube size of 8 minimum to point at the module that requires a lot of wiring and increases risk of noise on power rails. Things best left to external modules: CV-controlled CV offset module - add.

New Pull Request

Labels Milestones