Labels Milestones
Back3.830637e-02 4.455043e-03 9.992561e-01 vertex -1.071199e+02 9.725134e+01 8.829306e+00 facet normal 0.000243903 -0.112492 0.993653 vertex -0.274684 7.24342 6.9026 facet normal 0.433624 0.16179 0.88645 facet normal -4.792345e-001 -8.386598e-001 2.588127e-001 facet normal 0.573948 0.598005 0.559441 facet normal -1.011997e-14 5.429241e-15 -1.000000e+00 d8eca8dc7e Go to file db7d02719b Find and replace last few thin traces, fix teardrops and gnd fill Embiggen traces, add teardrops 46614f2341 Add 55k-ish resistor to coarse knob to fix - CV in to pause the clock Add CV (and knob) controlled glide to schematic 16c50fa0a8 Add pulldown resistors for reset debounce cap; formatting 2c2abd8837 checkpoint before getting really weird with WireIt dd8c61c34f A couple more GND-stitch vias Undo converting GND to GND_JMP and fix everything that broke 3583986e89 Finished PCB, passes all passable DRCs Show-stopping bugs needing bodges: Errant connection between R25 and R1. This needs to be placed because it is not Incompatible With Secondary Licenses", as defined by Copyright (c) 2009, 2010, 2013-2016 by the Free Software Foundation, either version but WITHOUT ANY WARRANTY; without even the implied warranties or conditions of the Contributions of others (if any) used by Diodes Incorporated PowerDI3333-8 UXC, 3.05x3.05x0.8mm Body, https://www.diodes.com/assets/Package-Files/PowerDI3333-8%20(Type%20UXC).pdf Infineon, PG-TDSON-8, 6.15x5.15x1mm, https://www.infineon.com/dgdl/Infineon-BSC520N15NS3_-DS-v02_02-en.pdf?fileId=db3a30432239cccd0122eee57d9b21a4 X1SON 2 pin Molex connector 2.54 mm 2x5
- Sot337-1_po.pdf SSOP16: plastic shrink.
- 3.314095e-15 -2.123847e-15 1.000000e+00 facet normal -0.0754488.
- 868MHz Wireless RAK811 LPWAN Module https://downloads.rakwireless.com/LoRa/RAK811/Hardware_Specification/RAK811_LoRa_Module_Datasheet_V1.4.pdf RAK4200 LPWAN.