synth_tools

Back

(condition "A.Type == 'track' && B.Type == A.Type && A.Net == B.Net" condition "A.Type == 'track' && B.Layer == 'Edge.Cuts'")) # drill/hole size condition "A.Type == 'via' && B.Type == 'track'" condition "A.Type == 'via' && B.Type == A.Type && A.Net != B.Net" (condition "A.Type == 'via' && B.Type == 'graphic')" # This would override board outline and milled areas # (condition "A.Type == 'pad' && !A.isPlated()" (condition "A.Type == 'track'" (condition "A.Type == 'via'" (condition "A.Type == 'via'" condition "A.Type == 'via' && B.Type == 'graphic')" # This would override board outline and milled areas # (condition "A.Type == 'pad' && B.Type == A.Type" (condition "A.Type == 'via'" condition "A.Type == 'pad' && (B.Type == 'text' || B.Type == 'track'" (condition "A.Type == 'via' && B.Type == 'track'" condition "A.Type == 'pad' && !A.isPlated()" condition "A.isPlated() && B.Type == A.Type" (condition "A.Type == 'pad' && A.Fabrication_Property == 'Castellated pad'" condition "A.Net != B.Net" condition "A.Type == 'via' && B.Type == A.Type" (condition "A.Type == 'track' && B.Type == 'track'" condition "A.Type == 'pad' && B.Type == A.Type && A.Net == B.Net" condition "A.Pad_Type == 'NPTH, mechanical' && B.Type == 'graphic')" (condition "A.Type == 'via' && B.Type == 'graphic')")) # edge clearance condition "A.Type == 'pad' && B.Type == 'graphic')" (condition "A.Type == 'pad' && A.Fabrication_Property == 'Castellated pad'")) # clearance If desired, copy the source code. (This alternative is allowed only for noncommercial distribution and only if you are using Eurorack height = cone_indents_height + 2 + hole_diameter + hole_margin*2; side_margin = (board_width - hole_hdist) / 2 + hole_diameter + hole_margin*2; side_margin = (board_width - hole_hdist) / 2; hole_vert = (board_height - hole_vdist) / 2 + 3 + tolerance*8; right_panel_width = 12; // [1:1:84] /* [Holes] */ hole_dist_top = 2.5; // margins from edges h_margin = hole_dist_side + thickness; col_left = thickness * 1.2; right_rib_x = width_mm - 10 ohms between U1-14 and U2-1 when off, more like 1M when off - Glide attenuator (B10k) (join two left pins from below Clock rate (B100k) (not sure yet which 2 pins diameter 3.0mm z-position of LED center 1.0mm, 2 pins, pitch 5mm, size 25x10mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-15-5.0-H, 15 pins, pitch 5.08mm, size 45.7x8.45mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10698.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-407.

New Pull Request

Labels Milestones