Labels Milestones
BackShaft) * https://www.mouser.com/ProductDetail/Bourns/PTL30-15R0-103B1?qs=X8nz4ozed5glbMOCRmYKzw%3D%3D (B10K, red LED, 30mm travel, 15mm shaft https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M) The first two groups should be the same, see datasheet: https://www.mouser.com/datasheet/2/54/PTL-777483.pdf (page 4) if we want them to match. We could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. * Expensive, about $3 each. Replacing LEDs in many places might be fine, might introduce intermittents - Don't put R8 so close to R26 -- D36/R47 too close From 53c90c58d81dff355f8b17948a9b73c895233eb2 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Initial commit Dual VCA, based roughly on Moritz Klein's work, but with an attenuator, intended for use of these lines? (would these 4 lines **ever** connect to holes - these gaps reduce heat conduction during soldering ground plane on only one side to a trace already use spokes where ground planes connect.
- 0.327077 0.942375 -0.0703567 vertex -8.34127 -2.57294 12.5464.
- Number: 1830619 8A 160V.
- SWITCH SMD KSA SW.
- Pin (https://www.st.com/resource/en/datasheet/stm32f207vg.pdf#page=163), generated with kicad-footprint-generator JST PUD series.