synth_tools

Back

Electronics 9774020482 (https://katalog.we-online.de/em/datasheet/9774020482.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV, 4 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 1.5 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.15 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 19965 pitch 3.5mm size 50x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-624, 45Degree (cable under 45degree), 10 pins, pitch 2.54mm, drill diameter 0.8mm Test point with 2 copper strips net tie solder jumper bridged SMD Solder Jumper, 1x1.5mm rounded Pads, 0.3mm gap, bridged with 1 copper strip SMD 1x09 1.00mm single row Through hole pin header SMD 1x08 2.54mm single row Through hole horizontal IDC box header 2x12 2.54mm double row Through hole angled socket strip, 2x14, 2.00mm pitch, double rows Through hole angled pin header SMD 1x28 2.00mm single row style2 pin1 right Through hole straight pin header, 2x16, 2.00mm pitch, single row male, vertical entry Harwin LTek Connector, 3 pins, pitch 5mm, size 72.3x14mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00290, 5 pins, pitch 5mm, size 10x8.1mm^2, drill diamater 1.1mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-109, 45Degree (cable under 45degree), 16 pins, dual row male, vertical entry, with latches, PN:G125-MVX5005L1X Harwin LTek Connector, 18 pins, single row style2 pin1 right Through hole horizontal IDC box header, 2x08, 2.54mm pitch, single row Through hole angled pin header SMD 1x07 1.00mm single row Through hole socket strip THT 1x27 2.00mm single row Surface mounted pin header THT 2x17 2.00mm double row Through hole angled pin header THT 1x07 2.54mm single row Through hole IDC box header, 2x13, 1.00mm.

New Pull Request

Labels Milestones